单页简介

亚美am8手机app下载

厂址:江苏省苏州市吴中区东吴工业园兴吴路67号

电话:0512-68226118 68204423

传真:0512-65134034

邮箱:uuzb@163.com

产品详细

116

产品名称: ZJF弹簧上料机

发布日期: 2015/9/30 13:57:04

点击数: 8 

二维码:

简述:

产品详情

产品介绍
Product Introduction 
本机采用螺旋输送原理,使用钢丝弹簧旋转把塑料粉末从储料箱输送到塑料成形机料斗中,直至加满由料位器发出满料信号,停止加料,待料位下降到一定位置后,料位器发出信号,继续加料,如此反复循环,从而实现了加料自动化。
This machine adopts the principle of screw conveying and uses steel wire spring rotation to convey the plastic powder from material storage tank to the plastic molding machine hopper until filled and material level machine sends out full material signal, and then stop charging. After the material level drops to a certain location, material level machine sends out signal and charging is continued. With such repeatedly cycle, therefore charging automation is achieved. 
该机主要适用于各种塑料粉末及粒子的上料,与塑料挤出机,注塑机配套使用,具有简化工作、节省人力、改善劳动条件、操作简便、文明安全等优点。
This machine is mainly applicable to the feeding of plastic powder and particles, which hs the advantages of simplifying work, saving manpower, improving labor conditions, simple operation, civilization and safety, etc. using with plastic extruder and injection moulding machine. 
主要技术参数:

亚美am8手机app下载 www.dingyibomei.com Main Technical Parameters: 

注:电源规格,380V,50HZ;

该加料机适用于粉末粒度≤200目,表观比重≤1g/cm3;

特殊规格送料管长度可定制。


Remark: Power specification: 380V, 50HZ;

       The feeding machine is applicable to powder particle ≤200 mesh, apparent specific gravity ≤1g/cm3;

       Feeding tube length of special specification can be customized. 


上一个: XAL-700吸引式送料机

下一个:没有资料

版权所有:江苏苏州吴中区东吴工业园兴吴路67号   技术支持:亚美am8手机app下载